HK417 / MR762 Barrels / Gas Blocks

HKP Chamber Face Brush For All Barrels This brush was specifically designed to clean those hard-to-reach nooks and crannies in the barrel face.  Threaded to fit all standard 8/32 US cleaning rods. Compatible With: HK91, G3, PTR HK33, HK53, HK93 HK...

H&K HK MR762/417 Gas Block Pin This is the retaining pin for an HK MR762 gas block. A must have as HK says you have to use new pins once they are removed. Compatible With: HK MR762 HK 417

Midwest Industries Upper Receiver Rod Tool for HK417, MR762 Receiver support rod for HK417 and MR762 upper receivers. Designed to prevent receiver and index-pin damage during barrel nut removal, muzzle device installation, and other high-torque...

HK MR762 Barrel Nut Or Socket Barrel - German HK A must have for any removal or work done to barrel as the barrel nut may need to be replaced./417 Compatible With: HK MR762/417

H&K MR762/417/G28 Gas Block New German HK manufacture for the HK MR762 & HK417, G28 firearm. This unit comes without the sling loops installed. Compatible With: HK MR762 HK 417 HK G28

Heckler and Koch MR762 A4 Gas Vent Screws German gas vent screw for MR762 A4 gas block. Specifications: Factory reference: 1.3mm is the common factory vent screw size for MR556 A4 Sizing reminder: Larger mm equals more venting, Smaller mm...

HK MR762 A4 Barrel - 16.5" - Proofed Factory proofed HK MR762 A4 16.5" barrel with standard 5/8x24 RH thread pitch. Compatible With: HK MR762 A4