HK416 / MR556 Barrels / Gas Blocks

HKP Chamber Face Brush For All Barrels This brush was specifically designed to clean those hard-to-reach nooks and crannies in the barrel face.  Threaded to fit all standard 8/32 US cleaning rods. Compatible With: HK91, G3, PTR HK33, HK53, HK93 HK...

HK 416 & MR556 Gas Block Pin This is the retaining pin for an HK 416 gas block. A must-have, as HK recommends using new pins once they are removed or damaged.  Size: 5 x 18 mm.

HKP Gas Piston Ring Replacement Combo Set- 3 Rings The gas rings are prone to periodic breakage and wear and tear and require them to be replaced periodically. These are some of the most common breakage parts we see that need to be replaced on these...

HK MR556, HK416 & G36, SL8 Gas Piston Ring Replacement Combo Set - 3 Rings This is a high wear common repair & replacement item. The gas rings are prone to periodic breakage & wear, tear and require them to be replaced periodically...

HK 416, MR556 Barrel Nut Installation & Removal Tool New US manufactured barrel nut removal and installation tool. Each tool has the provision installed to allow the use of an off the shelf 1/2" torque wrench to be used while removing and installing...

HK MR556, HK 416 Barrel Nut or Socket For Barrel - Stainless Steel A must have repair and replacement part for removal or when you have any work done to your barrel as the barrel nut may become damaged in the removal and installation processes. Made in...

H&K HK MR556/416 10.4" Complete Vented Upper Gas Block New HK German manufacture newest "VENTED" version direct from HK Germany. Great upgrade part for existing 10.4" uppers that have the older style non-vented gas block or to use on the MR556 and HK...

Heckler and Koch Barrel nut for MR556A1 rifle All steel barrel nut. This item is a must-have repair and replacement part for removal or when you have any work done to your barrel, as the barrel nut may become damaged in the removal and...

HK German MR556, 416 Gas Block Complete - Low Profile Factory slimline, low-profile gas block for the MR556/HK416. This is the factory-correct gas block found on the MR556. Correct gas block to use with tight-clearance Geissele handguards on 14.5" &...

Nefarious Arms - NA5 HK 416 Adjustable Gas Block Nefarious Arm user configurable 2-position adjustable gas block compatible with 11″ – 20″ A1 MR556 and HK416 barrels.  Each gas block ships with 6 vent screws, a screwdriver,...

Nefarious Arms - Reaction Rod - HK 416  The Nefarious Arms H&K 416 Reaction Rod is used to securely hold the upper receiver in a bench vise so that work may be performed on the muzzle device. It is inserted through the rear of the upper receiver...

New HK German .223/5.56 Chamber Flute Cleaning Brush This item is ideal to have on hand for cleaning the flutes of the barrel. The flutes have to remain clean for the rounds to be extracted properly.