HK417 / MR762 Barrels / Gas Blocks

H&K HK MR762/417 Gas Block Pin This is the retaining pin for an HK MR762 gas block. A must have as HK says you have to use new pins once they are removed. Compatible With: HK MR762 HK 417

HK MR762 Barrel Nut Or Socket Barrel - German HK A must have for any removal or work done to barrel as the barrel nut may need to be replaced./417 Compatible With: HK MR762/417

Midwest Industries Upper Receiver Rod Tool for HK417, MR762 Receiver support rod for HK417 and MR762 upper receivers. Designed to prevent receiver and index-pin damage during barrel nut removal, muzzle device installation, and other high-torque...

H&K MR762 A4 1.1mm Gas Vent Screw German 1.1mm gas vent screw for MR762 A4. Provides less venting than the factory-installed 1.3mm screw. Compatible With: MR762 A4

H&K MR762 A4 1.2mm Gas Vent Screw German 1.2mm gas vent screw for MR762 A4. Provides less venting than the factory-installed 1.3mm screw. Compatible With: MR762 A4

H&K MR762/417/G28 Gas Block New German HK manufacture for the HK MR762 & HK417, G28 firearm. This unit comes without the sling loops installed. Compatible With: HK MR762 HK 417 HK G28

H&K MR762 A4 1.0mm Gas Vent Screw German 1.0mm gas vent screw for MR762 A4. Provides less venting than the factory-installed 1.3mm screw. Compatible With: MR762 A4

H&K MR762 A4 1.5mm Gas Vent Screw German 1.5mm gas vent screw for MR762 A4. Provides more venting than the factory-installed 1.3mm screw. Compatible With: MR762 A4

H&K MR762 A4 1.7mm Gas Vent Screw German 1.7mm gas vent screw for MR762 A4. Provides more venting than the factory-installed 1.3mm screw. Compatible With: MR762 A4

H&K MR762 A4 2.4mm Gas Vent Screw German 2.4mm gas vent screw for MR762 A4. Provides more venting than the factory-installed 1.3mm screw. Compatible With: MR762 A4

H&K MR762 A4 2.1mm Gas Vent Screw German 2.1mm gas vent screw for MR762 A4. Provides more venting than the factory-installed 1.3mm screw. Compatible With: MR762 A4

H&K MR762 A4 2.0mm Gas Vent Screw German 2.0mm gas vent screw for MR762 A4. Provides more venting than the factory-installed 1.3mm screw. Compatible With: MR762 A4