JMAC G36K/HK33 Compensator (KeyMicro) - Threaded 15x1

JMAC G36K/HK33 (5.56/.223) Compensator (KeyMicro) - Threaded 15x1

In order to use this device with a suppressor, it must be installed by a professional to ensure it is properly mounted and aligned. Do NOT shoot without checking alignment with bore rods. HK Parts & JMac Customs are not responsible for any damage to the suppressor, or any injury resulting from improper installation. Some firearms are NOT suitable suppressor hosts, just because you can thread this muzzle device on, does NOT mean it is safe to use.

The RRD-2C is a shortened version of the RRD-4C by removing the 2 smallest ports creating a more compact package!

Specifications:

• Threaded 15x1
• Sleeves The Barrel 0.9" & Adds 1.33"
• KeyMo & KeyMicro Suppressor Compatible
• 10mm Bore
• Overall Length 2.23"
• 17-4ph Stainless Steel
• Black Nitride Finish

Compatible With:

• Will NOT Fit The G36C
• G36K (5.56/.223)
• HK33 (5.56/.223)
• Any Threaded 15x1 Firearm That Is More Than 0.9" From The Gas Block
•  

INSTALLATION REQUIRES FACE SHIMS OR FACE MILLING.  Face shims are available here.

Keymount & X-Series Suppressor Compatibility

HK Parts & JMac Customs recommends that all suppressor mounts be installed and checked for alignment by a certified professional. Serious damage could result to your suppressor/firearm and physical harm is possible if installed/used incorrectly. All suppressor mounts MUST be tight against the shoulder or face of the barrel, using shims or face-milling method. Contact us if you have any questions or need a recommendation for professional installation. JMac Customs LLC and HK Parts are not liable for injury, damage, or death related to the usage of this product.

***JMac Customs LLC and HK Parts are not responsible for the end users misuse of JMac products.***