MP5 / SP5 Receivers / Uppers

HKP MP5 Replacement Buffer for Folding Stock or End Cap Spare replacement buffer for choate folding stocks or end caps. Compatible With: Choate MP5 and MP5K Stocks or End Caps (NOT compatible with MP5 .22 LR)

HK Stock Push Pin Bushing Weldment All-steel stock pin bushing weldment for welding in the rear of the flat. This bushing welds into the folded flat and guides the large push pin through the receiver to hold the stock to the receiver. Compatible...

H&K HK Pin - Barrel - Retaining - 5mm - Standard Size Barrel Retaining Pin Each barrel pin is used for installing a new or replacement barrel. HK suggest using a new factory barrel pin when installing or reinstalling a HK barrel. We also offer the HK...

HKP MP5, HK94 Case Deflector Rivet Each case deflector will require 2 rivets to attach the case deflector to the receiver or flat. If you want the factory look and feel of doing it right these rivets are a must. These are a factory correct rivet that...

H&K Oversized Barrel Retaining Pin - 5.25mm This is the barrel pin used for installing a new or replacement barrel. HK suggests using a new factory barrel pin when installing or reinstalling an HK barrel in the trunnion. Each pin is slightly...

H&K Cocking Tube Hanger Clip The HK cocking tube support hanger is the part that welds onto the end of the cocking tube that allows the forearm to install with the use of a small push pin. New HK German factory manufactured. Ready to weld onto your...

HKP Semi Shelf Weldment Metal Grip Housing For Semi-Auto Trigger Packs This HK German specification metal trigger frame weldment is designed for converting SEF style housings from full auto to semi-auto. This weldable block or shelf is essential for...

Choate MP5 & HK94 End Cap and Sling Swivel Made in the USA, MP5 and HK94 end cap features an extra thick heavy-duty rubber buffer that is replaceable with a simple screwdriver. Each HK end cap also features a sling swivel for use with all types of...

HKP Picatinny Rail For HK Receivers - 17 Slot Mil-Spec all steel Picatinny rail in the white. Relief cut for HK receivers and made for mounting scopes and optics to HK builds. This unit easily welds to the top of your HK receiver. Compatible With: HK...

HKP Spare Buffer For Folding Stocks & End Caps New US manufactured flat style "H"buffer to replace the factory HK buffer on MP5K folding stocks and end caps. As well as a spare or replacement buffer for the MP5 & MP5K folding B&T stocks. Made...

HKP MP5 Sling Clip for Magwell This is the factory correct sling clip that attaches to the left hand side of the magwell. Note: 3 rivets are required to attach - sold separately 

Flat Bending Jig Set For All HK Style Flats - Billeted - Aluminum Aluminum billeted universal flat bending jig for all HK receiver flats including PTR .308 flats and the PTR/LSC flats. Each bending jig comes complete with all the pieces you need for...