HK P2000 Series

The most popular upgrade available for your HK pistol. By adding the HK45C extended mag release will provide more than double the contact, surface area to aid in faster, more reliable mag releases. The larger mag release makes it possible to release the...

HK Trigger Return Spring ToolIt is no secret that the hardest spring to install in the HK series of handguns from the USP, USPC to the modern HK45, HK45C & P30 & VP9 series is the trigger return spring. In many cases, installing the spring...

Metric Parallel Pin Punch Set With Guide Sleeves - German Manufacture - 8 Piece This punch set is the exact same set used in the HK Armorer classes and approved by HK for use when installing & removing the roll pins from HK pistols & rifles...

Finally a New US Production 10 lb. Hammer Spring For HK USP, P30 & P2000. Brought about by many customers asking for a 2 lb. lighter hammer spring than stock (12 lb.). This is also a popular hammer spring used in some custom trigger jobs along with...

H&K HK 13 Round USPC/P2000 9mm Magazine - Black Each magazine is a current HK German manufacturer. Brand new and factory fresh. Compatible with: HK USP Compact 9mm HK P2000 9mm Fits the P2000SK will stick out below the mag well when installed

H&K 12 Round HK P2000/USPC .40 S&W Magazine - Black New HK German manufacture. All steel with rubberized floorplate with finger rest. Compatible with: HK USP Compact .40 Cal HK P2000 .40 Cal Will also fit the P2000SK .40 (will not fit flush)

HK VP9/P30 To VP9SK, P30SK & P2000SK XGRIP Sleeve Patent pending OEM factory accessory for the HK VP9SK, P2000SK & P30SK that allows the addition of the HK VP9, P30 magazine to be added that enhances the versatility, look, and feel of the gun...

Replicate our custom in-house short reset conversion with a drop-in kit for your HK P2000 or P30 without a thumb safety. Cut from bar stock steel, these kits provide an exacting fit for easy install. The kit shortens the reset travel distance...

HK Parts Armorers Puck Punch Bench Block Tool For All HK Firearms The HK armorers' puck punch bench block tool is standard issue at all HK armorers' courses. The purpose of the tool is to aid in installing axle and roll pins in your firearm while...

HK Magazine Release Spring For HK Pistols HK P30, P30L & P30S HK P30SK HK P2000 HK P2000SK HK45 HK45 Compact HK VP9 HK VP9SK HK VP40 ALL HK USP & USP Compact Models 9mm .40 S&W .357 SIG 45 ACP All HK Tactical, Elite & Expert Models

HKP HK USP Pistol Light, Laser Adapter This is the flashlight adapter needed for all HK USP Full Size Pistols to attach an aftermarket light or laser to the bottom rail of the firearm since HK USP's use a proprietary rail system. Made from hard coat...

VP9SK, P30SK & P2000SK - USPC/P2000 Mag Adapter X-Grip The XGRIP HK, VP9SK, P30SK & P2000SK are patent pending OEM factory accessories for the HK, V P30SK, and P2000SK that enhance the versatility, look, and feel of the gun.  The XGRIP...

H&K HK USPC/P2000 9mm Magazine Flat Floor Plate USPC 9mm 13 round flat floor plate for the 9mm UPSC and P2000 magazine. This is a Heckler and Koch genuine part. Perfect for concealed carry or for a lower profile HK USP Compact 9mm 13 Round...

HK Finger Rest, Floorplate For P2000SK - +1 Round A P2000SK 9mm magazine extension or floorplate that adds an additional round to the 10 round magazine (11 rounds total). The mag extension also provides a pinky rest that is super well balanced,...

Enhanced Magazine Release - Black - HK USP, P2000, HK45CNew HK Parts Enhanced and Over-sized Magazine Release. The over-sized magazine release increases the overall surface area and makes it possible to release the magazine without changing the position...

H&K 10 Round HK USPC/P2000 9mm Flat Floorplate Magazine - Black Perfect for concealed carry as the floor plate is flush rather than extended. New HK German mag. Compatible with: HK USP Compact 9mm HK P2000 9mm HK P2000 SK 9mm (will extend below the...

Replicate our custom in-house short reset conversion with a drop-in kit for your HK P30 with thumb safety. Cut from bar stock steel, these kits provide an exacting fit for easy install.The kit shortens the reset travel distance by about one-third,...

HK P2000 SK 9mm - 10 Round Magazine With Finger Rest Fits the HK P2000SK sub-compact (SK) model only—new Factory German HK manufacture.  

The XGRIP P2000 is a new patent pending OEM factory accessory for the HK P2000 that enhances the versatility, look, and feel of the gun.Versatility: Size of a Compact, Capacity of a Full-Size. The XGRIP adapts the HK P30 hi capacity magazine for use in...

New HK German P2000 SK Magazine Flat Floor plateLow Profile Style Without The Finger Rest And Best For Concealed Carry Or For A Low Profile. Also known as the P2000SK Flat floorplate. This floorplate will fit all HK P2000 SK magazines in 9mm, .40 & ...

HK Parts Armorers Puck Punch Bench Block Tool 8 Piece German Rennsteig Punch Set 20 Piece German Feeler Gauge Set

This is the commonly replaced roll pin for the rear backstrap that you can swap and change out to different sizes. Great spare to have on hand when doing maintenance on your HK pistol. HK suggests replacing the roll pin every time the backstrap is...

A great replacement item and one that is good to have on hand for spares as they do wear with use.Fits all of the following HK firearm magazines: HK VP9, VP9SK, VP40 9mm & .40 P30, P30S & P30L, P30SK 9mm & .40 USP Compact 9mm, 40, .357 P2000...

Extended Floor Plate For USPC 9mm 13 round Magazine- New Rubberized StyleThis is the new style that is rubberized to resist breakage when the magazine is dropped.USPC/P2000 9mm magazine floorplate with finger restCompatible with all: HK USPC 9mm 13...

H&K HK P30/USPC/45C/P2000 Firing Pin Spring A must have spare replacement part to keep on hand and to swap out during pistol servicing. Compatible with: HK USP Compact 9mm HK USP Compact 40 & .357 HK USP Compact 45 HK P2000 Series HK P2000SK...

9mm Magazine Locking Plate New HK German factory part. This is the locking plate for the bottom of the magazine spring. Compatible with: VP9 15 Round VP40 13 Round VP9SK 15 Round VP9SK 13 Round P30 15 Round P30 .40 13 Round USP Compact 9mm 13 Round USP...

Silicone gun cloth for all HK firearms to preserve and protect your firearms finish. Will also work for any firearm, magazine or part. A great way to protect your collectibles.

  HK Sight Removal & Installation Sight Tool For - HK USP, USP Compact & P2000 Models A rare offering and no longer available. This is a special offering while supplies last. Brand new in the box HK sight tool.The HK Sight tool is a compact...

Strike Industries introduces the industry?s most extreme general purpose weapons lubrication, cleaning, and protection solution. Strike Industries? AntiVenom-XPLC is the culmination of years of research and fine-tuning, both on the range and in the lab...

Replicate our custom in-house short reset conversion with a drop-in kit for your HK P2000 or P30 without a thumb safety. Cut from bar stock steel, these kits provide an exacting fit for easy install.The kit shortens the reset travel...

HK USP Compact/ P2000 .40 12 Round Floor Plate Flat - Low Profile Compatible with: HK USP Compact 40 S&W 12 Round Magazine HK USP Compact 357 SIG 12 Round Magazine HK P2000 40 S&W 12 Round Magazine

12LB Stock Hammer Spring This is the spring used in some custom trigger jobs, along with other trigger return and firing pin block springs. This spring can be used on the P30 along with the light trigger return spring and light firing pin block...

H&K 10 Round HK P2000/USPC .40 S&W Magazine - Black with Red Follower Factory HK German 10 Round magazine. Compatible with: HK USP Compact .40 S&W HK P2000 .40 S&W HK P2000 SK (will fit below the bottom of the mag well)

HK P2000 +5 magazine extension coupled with a new full-size HK P2000, 13 round magazine. Each unit is then fully assembled as an 18 round HK P2000 magazine. Ideal for competitive shooters, concealed carry or for everyday use while at the range. Each...

HK German P2000 SK Magazine Floor Plate - ExtendedP2000SK extended magazine floor plate fits all P2000 SK magazines. The perfect floorplate if you want a place for your pinky when grasping the firearm. P2000 SK P30SK (with slight fitting)Please note:...

HK P2000 +5 magazine extension coupled with a new full-size HK P2000 .40 Cal 12 round magazine. Each unit is then fully assembled as a 17 round HK P2000 magazine. Ideal for competitive shooters, concealed carry or for everyday use while at the range...

HK P2000, P2000SK, HK45 & HK45C Slim Slide Release Lever Set (both left and right sides). This provides a lower profile slide release for those that conceal carry or for those that ride the slide and prefer a lower profile slide release. Factory...

Magazine Spring  A great wear and replacement item as this is a consumable part and prone to wear and tear. If your slide is not locking back on the last round or you are having issues with reliable feeding, the magazine spring may be fatigued and...

Enhanced Magazine Release - Red - HK USP, P2000, HK45CNew HK Parts Enhanced and Over-sized Magazine Release. The over-sized magazine release increases the overall surface area and makes it possible to release the magazine without changing the position...

Red Laser Bore Sight-.45 Laser bore sight system. Each unit comes complete with batteries (4)and instructions for operation. Easy to use and priced so that every shooter can have one for each caliber of firearm that they have. Works great for both...