MP5K / SP5K Maintenance / Tools

HK Diopter Rear Sight Tool - Military Contract Diopter sight tool is perfect for those that need to adjust all sizes of HK diopter type sights for the entire family of HK rifles including clones. A military contract over-run and mil-spec quality at the...

Maglula Mag Loader/Unloader When using this part, the magazines can be loaded in 1/3 (60% less) of the time than loading by hand; this equates to more time shooting and less time loading. Features: Easy to use (step-by-step instructions included) Loads...

Metric Parallel Pin Punch Set With Guide Sleeves - German Manufacture - 8 Piece This punch set is the exact same set used in the HK Armorer classes and approved by HK for use when installing & removing the roll pins from HK pistols & rifles...

HKP Chamber Face Brush For All Barrels This brush was specifically designed to clean those hard-to-reach nooks and crannies in the barrel face.  Threaded to fit all standard 8/32 US cleaning rods. Compatible With: HK91, G3, PTR HK33, HK53, HK93 HK...

HKP Armorer's Tool Kit   Includes: HK Parts Armorers Puck Punch Bench Block Tool 8 Piece German Rennsteig punch set 20 Piece German Feeler gauge set

HK MP5, HK SP5, HK94 & MP5K, SP89, SP5K cleaning kit complete Includes: Saf-T-Clad Cleaning Rod Accessory Adapter Section #8-32 Patch Holder HK Chamber Face Brush (Made in the USA) 9mm MP5 Barrel Flute Brush - MKE Contract Phosphor Bronze Bore...

HKP 3 Lug Adapter Wrench HK 3-Lug adapter tool that slides over the male end of the 3-lug adapters commonly used on threaded barrel applications for the addition of suppressors, flash hiders, compensators, silencers, etc. You can then tighten them down...

Flat Bending Jig Set For All HK Style Flats - Billeted - Aluminum Aluminum billeted universal flat bending jig for all HK receiver flats including PTR .308 flats and the PTR/LSC flats. Each bending jig comes complete with all the pieces you need for...

HK Receiver & Magazine Cleaning Brush For All HK's Fits all standard 8-32 US thread cleaning rods. Made and designed for cleaning the HK magazines as well as the upper and lower receivers and mag wells. Works with HK and non-HK applications alike.

HKP HK MP5SD 9mm Barrel Port Brush The HKP MP5SD barrel port brush can be rotated in either direction for stiffer or softer cleaning when using our proprietary handle. Compatible with any brush handle featuring the factory thread pitch. Compatible...

AntiVenom-XPLC Lubricant and Cleaner Strike Industries introduces the industry's most extreme general-purpose weapons lubrication, cleaning, and protection solution. Strike Industries AntiVenom-XPLC is the culmination of years of research and...

Flat Bending Jig Set For All HK Style Flats - Billeted - All Steel All steel billeted universal flat bending jig for all HK receiver flats including PTR .308 flats and the PTR/LSC flats. Each bending jig comes complete with all the pieces you need for...