HK G3/91 Small Parts

Replacement Spring for HK style push pin - Small  A must have replacement item to have on hand. A quick and easy install spring to get your push pins back to working condition. A great replacement for those worn out springs that come loose while in...

H&K Magazine Catch, Push Button Roll Pin New HK German-made. The mag catch roll pin is used to attach the magazine catch to the mag release button. Compatible With: HK G3, 91, PTR HK MP5, 94, SP5 HK 93, 33, 53 HK SP89, MP5K,...

H&K +4 Roller For Bolt Head 8.04mm - Over-sized New HK German not surplus or used goods. The correct roller is essential for proper head spacing and the bolt gap. Compatible With: HKG3, 91 & PTR HK93, 33, 53 HK MP5, MP5K Cetme, C308 Clones...

HK91, G3, PTR, CETME Push Pin Reinforcement Weldment HK91/G3/PTR91 or CETME steel receiver flat weldment that is added to the rear of the receiver where the 2 large stock push pins install to reinforce this section of the receiver against damage or use...

Locking Lever - HK German G3 - New Old stock No longer made or offered by HK. This is the factory HK German manufactured bolt carrier locking lever. New never installed. These are the LAST new units that HK made. There will be no more once we are sold...

H&K German Recoil Guide Rod Rivet This rivet holds the stop pin and recoil spring captive and in place to the recoil rod itself. The price is per rivet. New old stock HK German rivet. Compatible With: G3, 91, 33, 93, & 53 MP5, 94 MP5K SP89 HK21...

HK German HK G3, HK91, & PTR Firing Pin Spring This is a common repair and replacement item and is great for spares as this is a common breakage part.

H&K +2 Roller For Bolt Head 8.02mm - Over-sized New HK standard (8.02 mm) locking roller. The proper roller size is essential for a proper bolt gap. New HK German, not surplus or used out-of-spec part. Please Note: The price listed is per roller...

Cocking Tube End Cap - Steel - US Made Manufactured from solid billet steel and finished in black in a nitride finish. Compatible With: All 90 series HK firearms and clones that use a triple frame/sight tower

H&K 90 Series Hammer Axle For Trigger Pack HK German used hammer axle for the 90 series style of trigger packs. Each axle pin or pivot pin measures .237 inches (6.0mm). A great spare and must have spare part for anyone that owns an HK 90 series of...

M-LOK MVG® VERTICAL GRIP M-LOK SLOT SYSTEM The M-LOK MVG is a light weight, inexpensive vertical foregrip that attaches directly to M-LOK compatible hand guards and forends with no additional Picatinny rails required. Made from the same high quality...

Ejector Lever Axle Retaining Spring This is the perfect spring ring to replace your worn out ejector lever axle spring ring. Made to HK spec for the best US replacement part on the market. Replacement of the retaining spring clip is necessary to keep...

HK Recoil Rod Guide Ring For Recoil Rod Assemblies This item is a high-wear item & is great to have as a spare part. Compatible With: HK MP5 HK 94 HK MP5K HK 91 HK G3 HK 93 HK 33 HK 53 HK 21 (not E guns) Other HK 90 Series Rifles & Pistols.

Sear/Catch Complete For HK 90 Series Trigger Packs - German HK - Used German HK Sear/Catch complete with installed detent, spring and roll pin. Used surplus in VG-EXC shape and in perfect working order and complete. This item is an absolute bargain at...

Push Button For Magazine Catch Compatible With: G3 91 MP5 MP5K SP5K-PDW (For SP5K's not equipped with the paddle release, purchase this kit) 94 93 33 PTR, Clones, ETC.

PTR (7.62x51/.308) Flash Hider - Threaded 5/8x24 RH The PTR Flash Hider is made in the USA to the exact specifications of the original HK flash hider, following strict HK standards. This flash hider offers the best quality and price in the country,...

HK 90 Series SEF & Navy Style Trigger Return Spring For HK 90 series 91, 94, 93, etc. (semi or full-auto). This item will fit any NON-burst trigger pack. Compatible With: MP5, MP5K, SP89, & SP5K HK G3, HK91, PTR HK 93, 33, HK33K, &...

PTR Trigger - 90 Series - Billeted - USA   Made by PTR for the US market by a name that is known for quality, you know it is the best offering available. It will fit all 0,1, and SEF-style trigger packs. Each part counts as one US-made compliant...

HK G3, HK91, PTR 762/.308 Firing Pin HK German, new factory part made from steel. Great for spares as this is a common wear item. Compatible With: HK G3 HK91 HK PTR CETME & C308

Roller +9 - New - 8.09mm HK Parts Standard (8.09 mm) locking roller, The proper roller size is essential for proper bolt gap. US Manufacture. Please Note: The price listed is per roller. Order 2 (pair) for a complete set for the bolt head. An easy way to...

H&K Trip Lever- Friction - Used - Surplus HK German trip lever for HK F/A or registered sear trigger packs in used surplus condition. This is the older friction style trigger pack found on older HK trigger packs and all HK registered sear packs.

HK USA-Made Sear, Catch-Billeted Machined Steel Hard to find and important for keeping your HK build 922r compliant. This US-made sear counts as one US-compliant part for your rifle or build. Machined from a bar of solid ordnance grade steel, with the...

New HK German Roller Retainer Plate For Rollers This item is a common wear item that is great to have on hand as they are one of the top items that break or fail with use and age of the service weapon. Compatible With: MP5, 94 MP5K, SP89 HKG3, 91,...

Roller +3 - New - 8.03mm HK Parts Standard (8.03 mm) locking roller, The proper roller size is essential for proper bolt gap. US Manufacture. Please Note: The price listed is per roller. Order 2 (pair) for a complete set for the bolt head. An easy way to...

Magpul M-LOK 5 Slot Rail Section Designed for use with all M-LOK compatible Hand Guards and Forends, M-LOK Aluminum Rail Sections allow the attachment of various 1913 Picatinny spec rail-mounted accessories such as lights, vertical grips, etc. Machined...

HK German Ambidextrous Small Sling Pin For Forearm This ambidextrous pin will allow the user to attach a sling hook to the sling pin. This will also allow the user to use the sling on either the left or right side.

H&K Roller Type Trip Lever This is a genuine German Heckler & Koch part. This is the newer style trip lever for use with a roller sear catch, not the older friction type. Please Note: May or may not be marked with the X or XX...

H&K 91/G3 (7.62x51/.308) Firing Pin - Used Great for spares as this is a common wear item. Compatible With: HK G3 & HK 91, PTR or clone rifles

HK .308 Magazine Release Set (Left to Right) This magazine catch set consists of 4 pieces and is HK-manufactured. Compatible With: HK .308 rifles HK G3 HK 91 PTR-91 HK 91 Clones or Variants Includes: Magazine Catch Magazine Catch Spring Push...

H&K Rear Sight Bearing Factory HK Part for all rear sight assemblies. This item is required for any HK diopter rear sight assemblies.

HKP Semi Auto Shelf for Receiver - Billeted HK Semi Auto Shelf, Hanger Block to HK's factory specifications for c/p trigger housings. Weld on shelf that is the needed receiver block that welds to the rearward portion of the magwell to allow the use of...

HK G3 Large Buffer Screw This is the screw that screws in the back of the buffer. This is also needed to install the Magpul PRS2 stock. Used- in good, working condition.

H&K German Recoil Guide Rod Rivet-Used This rivet holds the stop pin and recoil spring captive and in place to the recoil rod itself. Compatible With: G3, 91, 33, 93, 53 MP5, 94 MP5K SP89 HK21 variants

PTR (5.56/.223) & (7.62x51/.308) Muzzle Brake - Threaded 15x1 RH Correct HK threading 15x1 right hand with HK style retaining spring to latch on the HK splined barrel. Made in the US and counts as one US 922r compliant part. Specifications: Threaded...

H&K Barrel Retaining Pin - 5.15mm This is the barrel pin used for installing a new or replacement barrel. HK suggests using a new factory barrel pin when installing or reinstalling an HK barrel in the trunnion. Each pin is slightly oversized for...

Roller +7 - New - 8.07mm HK Parts Standard (8.07 mm) locking roller, The proper roller size is essential for proper bolt gap. US Manufacture. Please Note: The price listed is per roller. Order 2 (pair) for a complete set for the bolt head. An easy way to...

H&K German Roller +2 - Used - 8.02mm Used HK standard (8.02 mm) locking roller. The proper roller size is essential for proper bolt gap. HK German Manufacture. Please Note: The price listed is per roller. Order 2 (pair) for a complete set for the...

H&K Cocking Tube End Cap/Dust Cap This part is Factory HK, painted black and not surplus or old stock. Each is factory-fresh and manufactured in steel. Compatible With: Compatible with all 90 series HK firearms and clones that use a triple...

Wood Stock - Used - Excellent Shape - HK G3, 91, PTR Complete rear stock for HK91/G3, PTR. These stock sets were in use with the German military and come used in varying degrees of condition ranging from very good to excellent shape overall.  A rare...

HK G3 Crush Washer For Buffer Screw