HK33 / HK53 / HK93 Receivers / Uppers

HK Stock Push Pin Bushing Weldment All-steel stock pin bushing weldment for welding in the rear of the flat. This bushing welds into the folded flat and guides the large push pin through the receiver to hold the stock to the receiver. Compatible...

H&K HK Pin - Barrel - Retaining - 5mm - Standard Size Barrel Retaining Pin Each barrel pin is used for installing a new or replacement barrel. HK suggest using a new factory barrel pin when installing or reinstalling a HK barrel. We also offer the HK...

H&K Oversized Barrel Retaining Pin - 5.25mm This is the barrel pin used for installing a new or replacement barrel. HK suggests using a new factory barrel pin when installing or reinstalling an HK barrel in the trunnion. Each pin is slightly...

H&K Cocking Tube Hanger Clip The HK cocking tube support hanger is the part that welds onto the end of the cocking tube that allows the forearm to install with the use of a small push pin. New HK German factory manufactured. Ready to weld onto your...

HKP Semi Shelf Weldment Metal Grip Housing For Semi-Auto Trigger Packs This HK German specification metal trigger frame weldment is designed for converting SEF style housings from full auto to semi-auto. This weldable block or shelf is essential for...

HKP Picatinny Rail For HK Receivers - 17 Slot Mil-Spec all steel Picatinny rail in the white. Relief cut for HK receivers and made for mounting scopes and optics to HK builds. This unit easily welds to the top of your HK receiver. Compatible With: HK...

Flat Bending Jig Set For All HK Style Flats - Billeted - Aluminum Aluminum billeted universal flat bending jig for all HK receiver flats including PTR .308 flats and the PTR/LSC flats. Each bending jig comes complete with all the pieces you need for...

HKP Picatinny Rail For HK Receivers - 15 Slot Mil-Spec all steel CNC'ed picatinny rail in the white, relief cut to fit flush and low profile on HK receivers. The most solid and consistent mounting platform made for mounting scopes and optics to HK builds...

DTAC Spec Billeted Semi Auto Shelf For C/P'ed Trigger Group -Dakota Tactical The needed receiver shelf that is welded to the magwell of the receiver to allow the use of clipped & pinned trigger housings. These are as made to DTAC's custom specs...

Flat Bending Jig Set For All HK Style Flats - Billeted - All Steel All steel billeted universal flat bending jig for all HK receiver flats including PTR .308 flats and the PTR/LSC flats. Each bending jig comes complete with all the pieces you need for...

HKP 90 Series Paddle Mag Release Easy Install Fixture The original one and only paddle mag release fixture. The perfect jig for the installation of the factory correct paddle mag release with the proper hole placement and an easy to use jig that will...

H&K Barrel Retaining Pin - 5.15mm This is the barrel pin used for installing a new or replacement barrel. HK suggests using a new factory barrel pin when installing or reinstalling an HK barrel in the trunnion. Each pin is slightly oversized for...