G36 / SL8 Small Parts

HKP HK G36, SL8 Forearm, Lower, Magwell U.S Push Pin U.S. made G36 push pin finished in black oxide. This push pin is also required for converting the SL8 to a G36. G36's use three of these factory push pins per rifle whereas the SL8 has two.

H&K HK MR556/MR762/416/417/G36/SL8 Complete Gas Piston New HK German gas piston assembly with three locking piston rings installed. This is a great spare part to have on hand, as the gas piston takes a lot of wear and tear. Compatible With: HK...

HKP Gas Piston Ring Replacement Combo Set- 3 Rings The gas rings are prone to periodic breakage and wear and tear and require them to be replaced periodically. These are some of the most common breakage parts we see that need to be replaced on these...

HK MR556, HK416 & G36, SL8 Gas Piston Ring Replacement Combo Set - 3 Rings This is a high wear common repair & replacement item. The gas rings are prone to periodic breakage & wear, tear and require them to be replaced periodically...

PTR (5.56/.223) & (7.62x51/.308) Muzzle Brake - Threaded 15x1 RH Correct HK threading 15x1 right hand with HK style retaining spring to latch on the HK splined barrel. Made in the US and counts as one US 922r compliant part. Specifications: Threaded...

HK SL8 & G36 Oversized Extended Mag Release New HK German SL8, G36, HK243 extended magazine release. A must have upgrade for your HK SL8, Sl8-G36 conversion or G36 firearm. The HK extended magazine release is a drop in replacement and requires zero...

New HK German G36 & HK SL8 Push Pin For Forearm, Mag Well Or Lower Each push pin is a factory German part and is new. This is also required for those doing the SL8 to G36 style conversions. A factory German G36 uses three of these factory push pins...

H&K MR556/MR762/416/G36 (5.56/.223) & (7.62x51/.308) Extractor Spring   A must-have replacement wear part and a great item to have on hand. Compatible With: HK G36 HK G36K HK G36C HK SL8 HK MR556 HK 416 HK MR762

HK G36, SL8 Push Pin For Forearm, Magwell, & Lower  Each push pin/locking pin retains the forearm, magwell, & lower to the upper receiver. Each G36 style firearm uses a total of 3X of these push pins. Compatible With: G36 G36K G36C G36...

HK G36 Or SL8 Factory Recoil Buffer A must have spare part as the buffer is prone to wear and breakage. Compatible With: All HK G36 models SL8 models Clones

H&K HK G36/SL8/MP7 Gas Block Pin The G36/SL8/MP7 gas block pin is the largest out of HK's line up (UMP/USC, 415/MR556, 417/MR762).

HK G36 & SL8 Magazine Release Axle - USA Mag release axle for all G36 & SL8 models. A must-have spare part. Made in the USA. Compatible With: G36 G36K G36K SL8 Other custom G36 type builds