H&K Heckler & Koch

12 Round HK USPC & HK P2000 .40 S&W Magazine - Black Low-profile magazine for concealed carry or a lower profile. Each is brand new old stock and may or may not be LEO marked on the magazine...

HK SL8 & G36 Top Rail Screw This rail screw is the standard length rail screw used for all SL8 and G36 top rails. With the exception of the dual and single option models. A must have part and an...

HK SL8-1 Countersunk Head Screw for Top Rail

HK SL8-1 Elbow Spring

HK SL8-1 Locking Lever Elbow Spring

G36 & HK SL8 Lower Axle Pin The G36/SL8 (all models) uses the same size axle pin for all of the lower components (3 total). Except for the bolt holding open the device axle. Must insert from the...

HK G36, SL8, USC, & UMP Compression Spring For Index Plate - Lower  

HK German G36 & SL8 Magazine Release SpringMag release spring for all G36 & Sl8 models. A must have spare part.

Detent Plate For V1 & V2 This will provide the safety and decocking functions for both the left and right side selector levers for the HK pistols below.  Compatible With: USP Full Size,...

Detent Plate For V3 & V4 With the installation of the V3/4 detent plate in place. This will configure the selector lever to de-cock only, no safety function will be provided or enabled. The V3/4...

HK Detent Plate For USP Variant 5, 6, 9, & 10 Conversions This plate, when installed, will allow you to have the "safety" only and NO decock function on your pistol. This plate will fit and work...

HK German Factory P2000SK .40 S&W Barrel Brand new HK P2000SK .40 Cal factory cold hammer forged polygonal rifled barrel. This barrel measures 3.25" and is drop-in ready.

HK SL8 Windage Adjustment Compression Spring

HK SL8 Trigger Return Elbow SpringThis is the lighter spring weight found only in the SL8 firearms. The G36 trigger return spring is much heavier in weight and thus has a heavier trigger pull over...

New HK German HK SL8 BarrelA rare find. Brand new unfired, uninstalled. German CFH HK proof marked HK SL8 barrel. For those that want a brand new replacement barrel or a new HK barrel for a custom...

German HK SL8 & G36 Match Hammer A hard to find factory HK SL8 & G36 match hammer. Finally after years of searching the G36 match hammer is available. Compatible With: HK SL8-6, SL8-1,...

HKP Gas Piston Ring Replacement Combo Set- 3 Rings The gas rings are prone to periodic breakage and wear and tear and require them to be replaced periodically. These are some of the most common...

HK German G36/SL8 Ambidextrous Sling Pin This part replaces all of the HK SL8 or G36 push pins with a loop for the sling. This can be moved to attach a sling on either the left or right sides with...

HK German G36 & HK SL8 Forearm With Rail Mounting Points Newer style that has the hard mounting points for the side and bottom rails. HK Black In Color. Compatible with all HK SL8's & G36E's...

New HK G36K Piston Rod Incomplete

G36K Factory HK blank firing adapter made exclusively for the G36K. This adapter is date coded and comes complete with the spring clip installed.

G36K Factory HK 4 Prong Flash HiderHK flash hider will fit any HK rifle barrel threaded 15 X 1 RH (Standard HK barrel thread).Overall length: 2 7/8" HK G36K HK Sl8 barrels threaded 15 X 1 Other HK...

HK German G36C Gas Piston Rod & Spring Assembly - Complete A must-have item for HK G36C conversions from G36 to SL8's or for spares for your G36C. New HK German factory OEM part. A high wear and...

New HK German G36C Gas Piston Rod Only.A must have item for HK G36C conversions from SL8's or for spares for your G36C.New HK German factory part.

HK German Factory G36C Flash Hider Threaded 15X1. Perfect for HK rifle barrels and conversion barrels. Compatible With: G36C SL8 conversion cut down barrels Other HK barrel applications

HK G36 Folding Stock Release Spring This is the spring that fits under the stock release button to activate the folding and retention of the G36 or UMP stock. Compatible With: HK G36 HK G36K HK...

New HK German G36 Or SL8 Firing Pin Great spare to have on hand. The firing pin fits all G36, G36K, G36C & SL8 variants.

H&K Detent Plate New HK German manufacture safety ONLY detent plate. This detent plate will convert the firearm to safety only with no decocking functions. Compatible With: HK45 HK45...

New HK German G36, G36K & G36C Bolt Head Complete. This Is Also The Needed Part To Allow The SL8 To Use The Double Stack Magazines. Inclused all of the parts such as the extractor, extractor...

HK G36 Bayonet Roll Pin

HK G36 Full Auto Slide Complete

HK G36 Bolthead Carrier IncompleteThis will not work with a HK SL8.

HK G36 Bolt Group New Factory German HK. HK G36 HK G36K HK G36CThis will not work with a HK SL8.

Main Recoil Spring For HK VP9 & VP40 - German HK VP9 VP9 Tactical VP9SK VP40 VP40 Tactical

H&K HK 45 Recoil Spring Guide Rod - Black Compatible With: HK 45 HK 45 Tactical

H&K P30L 4.45" 9mm Barrel - Black Factory German 4.45" barrel perfect for replacement or for that project barrel. Compatible with all HK P30 models.

Made in Germany at the HK factory from HK German Cold Hammer Forged barrel blanks, heat-treated and finished to HK specs. This is the only HK factory manufactured P30L threaded barrel. The finest...

HK German P30L .40 S&W Factory Barrel - German HK Factory German P30L .40 Cal 4.45" barrel perfect for replacement or for that project barrel. Compatible With: HK P30L HK P30, P30S (will be...

H&K HK VP9SK Standard Barrel - Black Brand new HK German Standard Length VP9SK Barrel. Marked HK 9mmx19 Brand new cold hammer forged & made in Germany. Compatible With: HK VP9SK models

H&K HK VP9SK Locking Block Guide Locking block guide complete, welded for frame on all HK VP9SK, VP40SK models. Compatible With: HK VP9SK HK VP40SK Does NOT fit the full size VP models