MP5 / SP5 Receivers / Uppers

MP5, MP5K 9mm Contact Piece For Paddle Mag Release - German This is the real deal NOT the .308 or .223 contact piece. Hard to find factory-correct, brand-new, latest production German HK 9mm contact piece. Compatible With: MP5, SP5, 94, SP5 MP5K, SP5K,...

MP5 40, MP5 10 Bolt Hold Open Lever - German HK - New  A great upgrade for the out-of-spec and sub-par quality part found on clone builds. Compatible With: MP5 40 MP5 10mm MP5 .357 Sig MP5 9 X 25 Dillon

Quick Detach Steel End Cap With Replaceable Rubber Buffer - HK MP5 With this MP5 QD end cap upgrade you will get a heavier buffer to internally protect your firearm and keep your bolt carrier in tip top condition for years to come. Machined aircraft...

HK MP5 40, MP5 10 Bolt Hold Open Axle Rod & Pin Combo Each bolt hold open rod axle includes the 2 pre-drilled holes for the threaded activation screw and the clamping sleeve. This offering includes both the axle rod and the threaded screw for the...

HK German case deflector for receiver flat or receiver for all MP5, HK94, MP5K & SP89 builds. The case deflector is riveted or welded in place on the ejection port of the 9mm receiver/flat to aid in the extraction of the 9mm round. HK MP5, 94 HK...

HK MP5 Rear Receiver Section  HK German demilled receiver section with rear sight base as installed at the factory. The rear push pin section is still attached to the demilled receiver section.

HKP HK MP5 Receiver Flat - Smooth Top The MP5 receiver flat has been meticulously crafted by the original German tool and die maker of the LSC receiver flat, utilizing factory original German prints and specifications. This receiver boasts a flat top,...

MP5 & MP5K Rear Sight Base- Weldment The only factory-correct sight base with the factory HK German side axis grooves.  Compatible With: HK MP5, 94 HK MP5K, SP89 HK MP5 40, MP5 10 MAC-5 clones may require custom fitment. Modified components are...

MP5 40 & MP5 10mm Trunnion Machined from ordnance-grade steel and heat-treated to factory specs. Each has the bullet guides pre-installed and included. These are the best USA-made trunnions on the market. Machined to HK spec, making the installation...

HKP MP5 40/10 Bolt Hold Open Weldment Set Complete Not offered or available anywhere else. This is the correct weldment set for the MP5 40/10 BHO components. 

H&K 90 Series Barrel Retaining Pin - 5.015mm Each barrel pin is used for installing a new or replacement barrel. HK suggests using a new factory barrel pin when installing or reinstalling an HK barrel.  Compatible With:  HK MP5, SP5, MP5K,...

H&K MP5 Rear Receiver Section HK German demilled receiver section with rear sight base as installed at the factory. MP5 & HK94 Factory HK rear sight bases (portion welded to MP5 receiver), you get the actual demilled section of an MP5 receiver...