Description
HKP 9mm Flash Hider - 3-Lug
Easily attaches to the end of any factory specification 9mm 3 lugged barrel. This flash hider does not require the of threads as it attached to the 3 lug tip. Also a great addition for any of 3 lug barrels found on in spec aftermarket conversions.
Installs & un-installs in seconds. This is the new style HK flash hider with the new style locking latch (perfectly flush when installed) that do not come off while shooting like the 1st generation style some vendors are offering. BE CAREFUL of the older style flash hiders out there. Made in the USA from ordnance grade steel. Attaches to in spec 9mm 3 lug barrels
- 3-Lug
Compatible With:
- HK MP5/MP5K
- HK 94
- 9mm Clones With 3-Lug Barrels
*Will not work with out of spec PTR 3-Lug Barrels, nor the SP5/SP5K*
.40 caliber barrels require a different size flash hider that we also offer in the MP5 40 section.
Videos
View AllClose
Additional Information
Firearm Model: |
HK MP5 |
Firearm Model: |
HK MP5K |
Firearm Model: |
HK 94 |
Caliber: |
9mm |
Color: |
Black |
1 Review
-
Very high quality flashider
Gently pry the arm up and back over the silver pin. Push the hider onto the 3-lug. Close the arm down. The flashider should not rotate CW. Rotate the flashider CCW which will cause the arm to move up, Proceed to pull the flashider off of the 3-lug. I did add a small amount of bearing grease to the 3 lugs.
Related Products
Related Products
HKP 9mm Titanium Flash Hider - 3-Lug
HKP HK Parts
HKP MP5 9mm Titanium Flash Hider - 3-Lug
HKP HK Parts
HKP 9mm A2 Style Flash Hider - 3-Lug
HKP HK Parts
HKP/H&K MP5 9mm Flash Hider - 3-Lug
HKP HK Parts
H&K MP5 9mm Flash Hider - 3-Lug
H&K Heckler & Koch
HKP 9mm Birdcage Style Flash Hider - Threaded 1/2x28
HKP HK Parts
B&T HK MP5/MP5K 9mm Flash Hider - 3-Lug - Quick Detach
B&T Brugger & Thomet
B&T .45 ACP Flash Hider - 3-Lug
B&T Brugger & Thomet