HK USP Small Parts

HK USP/P2000 Extended Magazine Release This mag release makes it possible to release the magazine without changing the position of your grip. Compatible With All HK Pistols In All Calibers 45, 40, 357, & 9mm: All HK USP Tactical, Elite, & Expert...

HK .45 ACP Pistols Barrel O-Ring - Green Get them while you can, as they are no longer available in green. The green o-rings were used when HK introduced o-rings on the Mark 23 and USP 45 Tactical HK pistols. All HK O-rings are made of the same material...

HK German Roll Pin German HK roll pin is crafted from a process using rolled spring steel resulting in robust part with stable fitment. HK suggests replacing the roll pin with a new unit each time it is removed. Fits and retains the extractor, mag...

Enhanced Match Flat Sear Spring The nickel-plated sear spring is also regarded as a "match" flat spring as it will improve the feel and "smoothness" when pulling the trigger as it takes up some of the gritty feel. It is a must-have upgraded part to...

HKP HK .45 Barrel O-Ring All Caliber Pistols - Red A rare find as we have found a small lot of HK red-colored HK .45 O-rings.  All HK O-rings are still made of the same material as the newer black O- rings only in the HK red color. A great spare and...

Lazy Wolf HK VP/P30/USP/HK45 Enhanced Firing Pin Block Spring An exciting and desirable new offering as a joint collaboration from the widely renowned Master HK pistol smith Lazy Wolf Guns & HK Parts! This spring was designed by master pistol smith...

H&K HK Barrel O-Ring .45 ACP Caliber Pistols - Black A great spare and a much-needed part for your HK barrel. This factory part is a high-wear item, as the O-ring provides the seal between the slide and the barrel, which provides a secure lockup with...

HKP HK USP Pistol Light, Laser Adapter This is the flashlight adapter needed for all HK USP Full Size Pistols to attach an aftermarket light or laser to the bottom rail of the firearm since HK USP's use a proprietary rail system. Made from hard coat...

H&K HK 45/45C/USP/P30 New Style Light Firing Pin Block Spring This part is commonly used with the light trigger return spring (shown below) for a light trigger pull conversion. This spring is one of the springs used to convert P2000,...

HKP HK USP/P2000/HK45C Enhanced Magazine Release Upgrade your pistol's performance with our oversized magazine release. Crafted from durable 6061 billet aluminum, this US made component offers an expanded surface area for quicker, more intuitive magazine...

Grayguns HK USP, HK45 Short Reset System This Short Reset System for the HK USP and HK45 replicates the short reset conversion available at Grayguns. Cut from bar stock steel, these kits provide an exacting fit for easy install. The kit shortens the...

HK USP, USPC, & HK45 Match Hammer Spring The match hammer spring is also known as the USPC standard hammer spring. This is also the correct spring needed for the light, TGS, and LEM conversion for the USPC & other custom pistol configurations...

Ambidextrous Left & Right Side Control Lever Set.  Genuine Heckler & Koch ambidextrous control lever kit includes left and right side control lever as well as the roll pin - everything that's needed for installation on all USP or USPC...

HKP +4 HK 45C, USPC .45 ACP Magazine Extension - Black HK Parts magazine extension +4 adds 4 additional rounds to the HK45C, 8 round magazine. Each unit can then be fully assembled into a 12 round HK45C magazine. Ideal for competitive shooters, concealed...

HK German .40 Cal Barrel O-ring Get them while you can, as they are no longer made in green and are only offered while supplies last. The green o-rings were first used on the older HK pistols. Made from the same material as the...

H&K 10 Round HK USPC/45C 45 Magazine Floorplate - Black Each floor plate is the new style rubberized floorplate for enhanced life. A great spare part to have on hand for repair and replacement of parts. This floorplate is commonly called the...

H&K HK 45/USP/USPC Complete Universal LEM Kit HK German "universal" LEM conversion kit for USP, USPC & HK45, and HK45C pistols. The universal LEM kit also fits the HK45C & HK45 Pistols. This kit will enable you to convert your V1-V10 HK...

Evolution Gun Works HK USP Full Size Trijicon RMR-SRO, Holosun 407C-507C Mount Includes: Mounting hardware Features: Material: 7075 aluminum Coating: matte black hardcoat Overall length: 1.780" Overall width: 1.1" Mounting hardware: (2) 6-32...

HK P30/USPC/45C/P2000 Firing Pin Spring A must have spare replacement part to keep on hand and to swap out during pistol servicing. Compatible With: HK USP Compact 9mm HK USP Compact 40 & .357 HK USP Compact 45 HK P2000 Series HK P2000SK Series HK...

H&K HK USP/ Tactical/ Expert Complete Recoil Assembly Brand new factory German manufacture. Compatible With: HK USP 45 Tactical HK USP 45 Expert HK USP 45 Elite Tech Note: The USP Tactical recoil assembly can be used in a standard USP 45 without...

H&K HK USP/45 Firing Pin Spring Compatible With: HK USP 9mm HK USP 40 HK USP 45 HK USP Tactical models HK USP Expert, HK Elite HK45, HK45 Tactical

H&K USP/USPC/VP40 Extractor Spring The extractor spring is one of the hardest working parts of your HK pistol. The extractor spring should be changed every 5K rounds. A must-have spare part to have on hand. Compatible With: HK USP 9, 40 .45...

H&K HK USP/Mark 23 Recoil Assemblies Snap Ring The snap ring secures the spring onto the recoil buffer spring assembly. This part can come loose and become lost or easily worn. Once you remove them, HK suggests replacing them with a new snap ring...

12LB Stock Hammer Spring This is the spring used in some custom trigger jobs, along with other trigger return and firing pin block springs. This spring can be used on the P30 along with the light trigger return spring and light firing pin block...

HK USP, 45 & 45C Ambidextrous Control Lever Set Roll Pin This item is to hold the right side lever onto the left side axle lever. These can easily be lost or damaged. A great spare part to have on hand. Compatible With: HK USP Full...

HK Match Hammer This is the factory-correct match hammer marked with the factory-correct "S" marking on the left-hand side of the hammer. Compatible With: HK USP 9mm HK USP .40 S&W HK USP .45 ACP HK USP Compact 9mm HK USP Compact .40 S&W...

HKP HK USP Red Dot Pistol Mount - Black Red Dot mounting plate to allow the use of a Burris Fast Fire, Docter, Vortex Venom or other similar specs Red Dot Sights. Compatible With: HK Full Size - USP 9mm HK Full Size - USP .40 HK Full Size - USP .45 (Not...

Evolution Gun Works HK USP Compact Trijicon RMR-SRO, Holosun 407C-507C Mount Includes: Mounting hardware Features: Material: 7075 aluminum Coating: matte black hardcoat Overall length: 1.780" Overall width: 1.1" Mounting hardware: (2) 6-32 flat...

H&K USP/P30/HK45 New Style Firing Pin Block A factory Heckler and Koch part. Compatible With: HK USP 45, 40 & 9mm HK USP Tactical, Elite, Expert HK USP Compact 9mm, .40 & .45 HK USPC Tactical 9mm, .40 & .45 HK P30, P30L, P30S &...

HK Flat Spring For Sear Catch This is a wear and replacement item on your HK pistol. A great spare part and needed spring to have on hand. Compatible With: HK USP 9mm HK USP .40 HK USP .45 HK USP Tactical, Elite, Expert HK USP Compact 9mm HK USP Compact...

HKP (9mm & 5.56/.223) Thread Protector For Barrels - Threaded 1/2x28 A must-have accessory to safeguard the threads on your threaded barrel, this thread protector is the finest available. It is the standard thread protector included with all HKPARTS...

HKP HK USPC Red Dot Pistol Mount - Black Red Dot mounting plate to allow the use of a Burris Fast Fire, Docter, Vortex Venom or other similar specs Red Dot Sights. Replaces rear sight to allow the mounting of a Red Dot Sight to your HK pistol listed...

HK USP New Style Firing Pin A must-have spare and replacement part for your HK pistol, as the firing pin is one of the most important spare parts to have on hand. Brand new HK German manufactured. Compatible with: HK USP 9mm HK USP 40 Cal HK USP .45 All...

Detent Plate For V3 & V4 Installing the V3/4 detent plate will configure the selector lever to de-cock only, thereby disabling the safety function. The V3/4 is a popular configuration to LE/MIL agencies around the globe as well as many concealed...

HK USP Match Trigger & Trigger Stop The match trigger overstep screw is threaded M2.5 X .45 for those who want to use the screw in other applications or pistol triggers. Compatible With: HK USP 9mm HK USP 40 S&W HK USP 45 ACP HK USP Tactical HK...

New HK USP 9mm & .40 Cal Tactical Recoil Spring With Buffer Assembly - Complete This is a great spare or replacement item to have on hand, it is the factory OEM HK part for Tactical models. Each recoil rod assembly was designed to be used for heavy...

H&K HK USP Compact Ambidextrous Control Lever Set Includes left and right side control lever as well as the spring pin. This item can be installed on either full-size or compact pistols. The USPC Ambi set has a slightly lower profile for those who...

HK USP & 45 LEM & Standard Models New Style Sear Catch This is the new style catch to convert older USP models to the newer style catch and is needed for the LEM conversions. It is also known as the USP match catch. Compatible...

HK LEM Cocking Piece Elbow Hammer Rebound Spring This item is a common wear and replacement item for those who have LEM triggers installed. Compatible With: USP USPC HK45 HK45C

HK USP Series Old Style Firing Pin Block Spring In order to use the new firing pin block spring, you also have to upgrade the firing pin, firing pin block, as well as the firing pin block spring. HK part #214192 has been replaced with...