HK MR556/416 Maintenance/Tools

Metric Parallel Pin Punch Set With Guide Sleeves - German Manufacture - 8 Piece This punch set is the exact same set used in the HK Armorer classes and approved by HK for use when installing & removing the roll pins from HK pistols & rifles...

HK Parts Armorers Puck Punch Bench Block Tool For All HK Firearms The HK armorers' puck punch bench block tool is standard issue at all HK armorers' courses. The purpose of the tool is to aid in installing axle and roll pins in your firearm while...

The perfect companion tool for all HK roller lock firearm owners. Each tool includes 20 feeler gauges from .05mm-1.0mm in .05 increments. To help users and shooters maintain the factory recommended bolt gap. This is the exact same tool set used in the...

HKP Chamber Face Brush For All Barrels This brush was made to clean the hard-to-reach and hard-to-clean barrel face. This is a must-have addition for cleaning your HK firearm. This item will fit all standard 8-32 US thread cleaning rods. Compatible...

HK Parts Armorers Puck Punch Bench Block Tool 8 Piece German Rennsteig Punch Set 20 Piece German Feeler Gauge Set

Original German Army Issue HK91/G3/PTR Cleaning Kit - SurplusEach cleaning kit kit comes complete with brass brush, oil brush, oil tube, hand cleaning brush, and pull chain. Originally built for the G3,91 & MG3 but will work on all .308 - .351 .cal...

HK Receiver & Magazine Cleaning Brush For All HK's Fits all standard 8-32 US thread cleaning rods. Made and designed for cleaning the HK magazines as well as the upper and lower receivers and mag wells. Works with HK and non-HK applications alike.

Silicone gun cloth for all HK firearms to preserve and protect your firearms finish. Will also work for any firearm, magazine or part. A great way to protect your collectibles.

Strike Industries introduces the industry?s most extreme general purpose weapons lubrication, cleaning, and protection solution. Strike Industries? AntiVenom-XPLC is the culmination of years of research and fine-tuning, both on the range and in the lab...

The first truly universal loader for rifle magazines. A must-have for every rifle owner. Doesn't damage feed lips. Saves time and energy, easy on your thumbs.Features: Load the following mags: AR15, AR10, AK47, AK74, FN SCAR-16/17, G36, Steyr Aug, MP5,...

Original German Army Issue HK91/G3/PTR Cleaning Kit Wick - Set of 8Originally issued for the G3,91 & MG3 firearms but will work on pretty much any and all rifles & pistols. Each set comes with 8 BRAND NEW German manufactured cleaning wicks. Each...

  HK 416 .22 LR Bench, Gunsmithing Mat  Our HK 416 .22 bench mat is the perfect cleaning & repair mat designed specifically for your HK 416 .22 models. Have fun and learn while you work on your favorite H&K firearm. The soft top...

Break Free Cleaner, Lubricant and Preservative 1/2 OZ. Penetrates and spreads along metal surfaces into every, crack, pit and crevice to undercut contamination and lift. carbon, fouling and residue away. Long-lasting lubricating film dramatically...

HK chamber face brush, Reciever Brush, Flute Cleaning Brush Cleaning Rod For All US Threaded cleaning Brushes (8-32 thread type). This rod is an aluminum rod that is mae to clean all HK rifles and mg's.

HK MR556, HK 416 Bench MatOur HK MR556, HK416 bench mat is the perfect cleaning & repair mat designed specifically for your Heckler & Koch MR556 & HK416 models. Have fun and learn while you work on your favorite H&K firearm. The soft top...

HK 416, MR556 Barrel Nut Installation & Removal Tool New US manufactured barrel nut removal and installation tool. Each tool has the provision installed to allow the use of an off the shelf 1/2" torque wrench to be used while removing and installing...

New - Original HK German MSG90/HK91/G3 Cleaning Kit - Old StockEach cleaning kit kit comes complete with brass brush, oil brush, oil tube, hand cleaning brush, and pull chain. Originally built for the G3,91 & MG3 but will work on all .308 - .351 ...

Maglula ltd., Magazine Loader/Unloader, Generation 2, Lula, 223 Rem/556NATO, Fits AR-15, BlackCurrently in use with many military, federal, government agencies. This loader sets the standard for the best loader for you HK 416/MR556 or other Ar-15/M16...

H&K German Universal Multi Tool This is ideal for the USC or SL8 style of weapon systems. Great multi-tool for sights, handguards, or work on any other accessories.

HK Cable Gun Lock Same lock that ships with factory HK firearms.

Real Avid Bore Boss Pull-Through Bore Cleaner - 5.56mm/.223From the barrel of innovation comes the ultra-compact Bore Boss, the first-ever self-storing, easy-feeding, clean-pulling, field-ready, hassle-free, pure-genius bore cleaner. The single-piece...

HK HK416/ MR556 (all variants & models) field cleaning kit- EnhancedCleaning kit made both the HK 416, MR556 series of rifles and MG's.Each Kit Includes the following parts: Saf-T-Clad Cleaning Rod HK Carbon Scraping Tool Accessory Adapter Section...

New Latest Print Production HK German 416/MR556 Operators Manual Each manual is 62 pages and is the go to resource to maintain, clean, and become well versed with the HK 416 and MR556 series of weapon systems.  

HK Factory German G36, HK416, & MR556 Complete Cleaning Kit Each kit includes the following parts: Saf-T-Clad cleaning rod Accessory adapter section #8-32 Patch holder Chamber cleaning brush Bore cleaning brush Double-ended utility brush Formula 3...

US Made - HK 416, MR556 Barrel Mandrel Tool.

THIS COSMETICALLY BLEMISHED ITEM - WORDS ARE CUT OFF (SEE 2ND PHOTO) THIS ITEM IS SOLD AS IS AND NOT ELIGIBLE FOR A RETURN. HK MR556, HK 416 Bench Mat Our HK MR556/HK416 bench mat is the perfect cleaning & repair mat designed specifically for...

HK MR556 Operator's Manual