JMAC Customs GFH H&K G36C (5.56/.223) KeyMount (KeyMicro) - Threaded 15x1

JMAC Customs GFH H&K G36C (5.56/.223) KeyMount (KeyMicro) - Threaded 15x1

In order to use this device with a suppressor, it must be installed by a professional - to ensure it is properly mounted and aligned. Do NOT shoot without checking alignment with bore rods. HK Parts & JMac Customs are not responsible for any damage to the suppressor, or any injury resulting from improper installation. Some firearms are NOT suitable suppressor hosts, just because you can thread this muzzle device on, does NOT mean it is safe to use.

The GFH is a combination of the German G36 flash hider and DeadAir silencers KeyMount

FACE SHIMS ONLY REQUIRED IF YOU WANT TO TIME IT

Specifications:

• Threaded 15x1
• Sleeves The Barrel 0.9" & Adds 1.33"
• KeyMo & KeyMicro Suppressor Compatible
• 10mm Bore
• Overall Length 2.7"
• 17-4ph Stainless Steel
• Black Nitride Finish

Compatible With:

• G36C (5.56/.223)
• G36K (5.56/.223)
• HK33 (5.56/.223)
• Any Threaded 15x1 Firearm That Is More Than 0.9" From The Gas Block

Keymount & X-Series Suppressor Compatibility 

It is recommended that all suppressor mounts be installed and checked for alignment by a certified professional. Serious damage could result to your suppressor/firearm and physical harm is possible if installed/used incorrectly. All suppressor mounts MUST be tight against the shoulder or face of the barrel, using shims or face-milling method.

Contact us if you have any questions or need a recommendation for professional installation.

***JMac Customs LLC and HK Parts are not responsible for the end users misuse of JMac products.***