JMAC Customs 2C H&K G36/HK33 KeyMount (KeyMicro) - Threaded 15x1

JMAC Customs 2C H&K G36 & HK33 (5.56/.223) KeyMount (KeyMicro) - Threaded 15x1

In order to use this device with a suppressor, it must be installed by a professional to ensure it is properly mounted and aligned. Do NOT shoot without checking alignment with bore rods.

HK Parts or JMAC Customs are not responsible for any damage to the suppressor, or any injury resulting from improper installation. Some firearms are NOT suitable suppressor hosts, just because you can thread this muzzle device on, does NOT mean it is safe to use. 

INSTALLATION REQUIRES FACE SHIMS OR FACE MILLING.  Face shims are available here.

Specifications:

• Threaded 15x1
• Sleeves The Barrel 0.9" & Adds 1.33"
• KeyMo & KeyMicro Suppressor Compatible
• 10mm Bore
• Overall Length 2.7"
• 17-4ph Stainless Steel
• Black Nitride Finish

Compatible With:

• HK G36C (NOT compatible with first gen. HK G36C & Tommy Built TG36C with shorter barrels)
• HK G36K
• HK33/93/53
• Any threaded 15x1 fiream that is more than 0.9" from the gas block

Keymount & X-Series Suppressor Compatibility 

JMac Customs and HK Parts recommends that all suppressor mounts be installed and checked for alignment by a certified professional. Serious damage could result to your suppressor/firearm and physical harm is possible if installed/used incorrectly. All suppressor mounts MUST be tight against the shoulder or face of the barrel, using shims or face-milling method.

***JMac Customs LLC and HK Parts are not responsible for the end users misuse of JMac products.***