H&K Heckler & Koch
H&K HK USP/P2000 Extended Magazine Release
- SKU:
- HKP-01669
- UPC:
- 642230247963
- MPN:
- 50234270, 234270
Description
HK USP/P2000 Extended Magazine Release
This mag release makes it possible to release the magazine without changing the position of your grip.
Compatible with all HK pistols in all calibers 45, 40, 357, & 9mm:
- All HK USP Tactical, Elite, & Expert Pistols
- All HK USP full-size pistols
- All HK USP compact pistols
- All HK P2000 pistols
- All HK P2000SK pistols
- Will NOT fit the HK45 full size, P30, P30L, VP9, or Mark 23 Pistols.
Installation: Use a 2.8mm punch to drive out the roll pin. Pull down on the mag release gently, and remove the spring (replace spring if needed) from the old mag release. Replace the mag release with the new HK 45C mag release, re-install by compressing the spring, and pushing the new roll pin in place.
Please note: Sometimes the extended magazine release will not engage the jet funnel magazines properly. Although this mag release will fit all of the HK models listed above, this is not an approved modification by HK. This magazine release is designed specifically for the HK45C as the standard OEM magazine release, not a factory upgrade for the above-mentioned pistols. This new style magazine release has a steel insert that makes contact with the magazine catch-notch. If installed on a USP pistol using polymer magazines, the steel contact point can eventually dig into the polymer magazine and cause the magazine fitment to become loose and make it possible for the mags to fall out.
Additional Information
Origin: |
German |
Section: |
Pistol Frame Parts |
Type: |
Magazine Release |
Sub Type: |
Lever |
Firearm Model: |
HK USP Series |
Firearm Model: |
HK P2000 |
Caliber: |
9mm / .40 S&W / .45 ACP / .357 SIG |
Color: |
Black |
Material: |
Polymer |
MPN: |
50234270, 234270 |
56 Reviews
-
Makes ejecting a mag easier ? without wedding to modify my Vedder light tuck holster.
Makes ejecting a mag easier ? without wedding to modify my Vedder light tuck holster.
-
Cant believe the difference this makes. The OEM mag release is awful, it?s so small and often would ...
Cant believe the difference this makes. The OEM mag release is awful, it?s so small and often would pinch my finger. This is probably the best upgrade you can get on your USP for <$50.
-
This replaced the original mag release on my P2000SK. The original was a bit small and hard to locat...
This replaced the original mag release on my P2000SK. The original was a bit small and hard to locate up against the trigger guard and frame. This larger release made it so much more easy and natural to instinctively find the mag release and operate it quicker and more reliably without thinking about it. Easy to install, I used a jewelers screwdriver to press the spring during installation. Well worth the small cost.
-
I have installed this on my P2000, P2000SK, and my USP Compact. It works great on all three. It ad...
I have installed this on my P2000, P2000SK, and my USP Compact. It works great on all three. It adds a little more leverage without causing inadvertent magazine ejections.
-
This release is what i needed. Easy install from videos online. Much better than stock part. Part Do...
This release is what i needed. Easy install from videos online. Much better than stock part. Part Dont extend past grip. Works great in my holster. Thank you
-
The extended magazine release is a great improvement and a simple to install. My P2000sk came with t...
The extended magazine release is a great improvement and a simple to install. My P2000sk came with the larger magazine release but the P2000 and USP Expert had the standard small magazine release. The larger magazine release make its so much easier and it doesn't hang up on anything or protrude. A small punch to remove it and I used an old credit card to compress the small spring.
-
Much easier to release the magazine. It is about 80% of the effort as the OEM.
Much easier to release the magazine. It is about 80% of the effort as the OEM.
-
Hello HK!!! The extended mag release should not be a replacement! Yes, very easy to install. Yes it ...
Hello HK!!! The extended mag release should not be a replacement! Yes, very easy to install. Yes it works GREAT! This release should be a standard on the USP!! Wet Happy!!
-
Works as advertised = Much Easier to get ahold of & release & So Easy to Install.. Glad You ...
Works as advertised = Much Easier to get ahold of & release & So Easy to Install.. Glad You Finally Got some more in stock.. Omega21 sent me one & now I need another for my 2nd Hk USP Compact 40
-
I prefer to keep my HK pistols very close to original production, have never had any problems. This ...
I prefer to keep my HK pistols very close to original production, have never had any problems. This one upgrade however is well worth the effort. Inexpensive and easy to install, makes a huge difference for me in being able to release the current magazine with one hand without requiring me to adjust my grip on the weapon. Highly recommend.