HK MR762/417 Stocks/Braces/Slings

Original Surplus German HK Leather - Well Used with No Loop Pulled from German military G3 rifles. Last of the remaining units, get them before they are gone. Compatible With: HK91 G3 PTR91 & CETMEHK93 33 53HK94 MP5HK clones Other custom...

HK G28 Fully Adjustable Stock For The MR762 & HK 417 - RAL 8000 The hard to find elusive HK G28 adjustable stock kit complete with the upgraded parts needed to convert a stock MR762 or HK417 to allow this stock system to be used. New HK German...

The ERGO 1.5" Bipod Slide Mount slides onto 1913 Picatinny rail, allowing shooters to mount a variety of rail accessories, including swivels or bipods. Slides onto Picatinny rails and held in place with set screw Designed for mounting a variety of rail...

HK 416  & MR556 E1/E2 & HK 417, MR762 Stock Release Lever PinBrand new factory German production. A must have spare part that should be replaced each time you remove or install the roll pin.Made in Germany.

HK MR556 & MR762 Eyelet Sling Adapter for Carrying Sling  New eyelet sling adapter for carrying slings. Perfect option for those that want to match their RAL8000 or tanodized handguards. These sling adapters are made in the USA, so you know they...

HK MR556 & MR762 Buttstock Release Lever Insert

HK MR762 and MR556 Buttstock Release Lever Insert Spring

HK 416/MP5 Sling Swivel Sling swivel for the Walther 416 and MP5 .22 rifles. This will attach to the quad rail on the 416 to give you an attachment point for a 2 point sling. May also be used with the an MP5 that has a tri rail set up.

2 Point Leather & Cotton Sling  Designed to replicate the original, out of production, German HK offering. Each sling is handcrafted in the US by a German artisan using quality US leather and hardware.  Each sling is approximately 48" long...

Single Point Leather Sling - OD Green Our leather sling utilizes two HK style sling hooks to attach to a single mounting point. Designed to replicate the original, out of production, German HK offering. Each sling is handcrafted in the US by a German...

Magpul RSA - Rail Sling Attachment Attaches to Picatinny rails for an additional point of attachment for slings.

MR762, 417 German E2 Concave Butt Pad With Bowden Retaining Wire HarnessThis Item Can Be Added As An Option On The HK MR762 & HK712/G28 E1/E2 Stock. Providing you an option to use either the concave or convex style buttpads for different mission...

MR762, 417 German Convex Butt Pad With Bowden Retaining Wire HarnessThis item can be added as an option on the HK MR762 & HK712/G28 E1/E2 Stock. Providing you an option to use either the concave or convex style buttpads for different mission...

HK MR762, HK 417 Buttstock Complete With Concave Buttpad E2 Style.

HK Ambidextrous Sling - Green - USED This sling is the factory (used) HK Green 1.25" Ambi Sling with dual HK sling hooks for use on either the left or right side of the weapon. Best used with the ambi sling pins as the option shown below. Can be used on...

Single Point Leather & Cotton Sling  Our leather sling utilizes two HK style sling hooks to attach to a single mounting point. Designed to replicate the original, out of production, German HK offering. Each sling is handcrafted in the US by a...

HK single point bungee sling for use on all HK & other firearm applications. This super high quality sling is a must have for those that prefer operating with a single point sling over the more traditional 3 point HK sling.HK Single Point Sling...

JMAC Arm Bar 8" Inch Rise with Brace Adapter and 1913 Folding Mech (A)rm(B)ar(8)inch(R)ise + AB-BA Brace Adapter + our 1913 Folding Mech (not assembled) Features: Modular Design - Brace/Stock with many mounting options Integrated QD Sling Socket 8"...

Ergo M-LOK QD Sling Mount

HK 416 & 417 Buttstock Release Lever

HK German 417 Assaulter 12" Parts Kit - Unfired The ultimate HK unicorn. Have you ever seen one let along seen a brand new German UNFIRED HK417 Assaulter parts kit with EVERY single part with the exception of the actual stripped lower. This is the...

HKP 2 Point Leather Sling - Red These new HK Parts 2-point slings are based off of the original German HK design that are no longer offered. This is a 1st time offering, handcrafted by a German artisan. Made in the USA from quality leather and hardware...

Single Point Leather Sling - Brown Our leather sling utilizes two HK style sling hooks to attach to a single mounting point. Designed to replicate the original, out of production, German HK offering. Each sling is handcrafted in the US by a German...

Single Point Leather Sling - Red Our leather sling utilizes two HK style sling hooks to attach to a single mounting point. Designed to replicate the original, out of production, German HK offering. Each sling is handcrafted in the US by a German artisan...

JMac 8" Stock with 0.275" Cheek Rise - 1913 Attachment Feautures: New Integrated Rubber Buttpad 2x Integrated QD Sling Socket 8" Length 0.275" Cheek Rise Drilled and tapped for optional cheek risers Compatible with JMAC & SIG folding mechanisms 7075...

JMAC 6" Skeletonized Tube with 1913 Folding Mech This M4 tube adapter replaces the standard buffer tube to ensure the stock folds as flat as possible! Fits most M4 style stocks/braces  Features: Integrated QD Sling Sockers 6” Length 6...

Buttstock Release Lever - RAL 8K - HK 416 & 417

HK G28 Buffer Tube / Receiver Extension- Tan (Ral 8000)New HK German buffer tube with the proper slot cut for use with the G28 stock. This is the factory correct part needed to get the full range and use of the G28 adjustable stock. Made in Germany by...

HK MR556 & MR762 Buttstock Release Lever

HK MR556 & MR762 Factory Sling Adapter - FixedFactory HK German Design & The Finest Design Available & Made To Last. New HK Manufactured Part To Allow The Factory HK416, MR762 Slings To Fit & Work On The MR556, MR762 As This Adds The...

HK MR556 & MR762 Factory Sling Adapter - Swivel Style Factory HK German design. New HK manufactured part that allows the factory HK416 and MR762 slings to fit the MR556 and MR762 by providing the proper attachment point. This unit swivels...

HK MR762, HK 417 threaded pin for the buttstock release lever insert

HK MR762, HK 417 Slim Line Retractable StockNew From HK Germany the slim line retractable stock fits all MR762, HK 417 buffer tubes. Marked with the HK logo and issued on specialized HK 417, MR762 rifles.Fits all: HK MR762 HK 417 HK G28 Other AR .308...

HK MR762, HK 417 Slim Line Retractable Stock- Tan RAL8000New From HK Germany the slim line retractable stock fits all MR762, HK 417 buffer tubes. Marked with the HK logo and issued on specialized HK 417, MR762 rifles. HK Tan RAL 8000 in color.Fits all:...

HK Factory German Single Point Sling This is the only HK factory single-point sling ever made or offered by HK. Each sling can be used in several applications and on several weapon systems, HK and non-HK alike. This attaches to one mounting point by way...

HK G28 Fully Adjustable Stock For The MR762 & HK 417 - Tan- RAL8000Just in and hard to find. The HK G28 adjustable stock upgrade to be used on MR762, HK417 stocks. The G28 stock is fully adjustable for length of pull as well as the cheek height...

JMac 8" Stock with 0.275" Cheek Rise - 1913 Attachment Our new TANodized 7075 options have a very rich metallic bronze tone with a unique lustrous sheen, we like to call it "Boujie Tan"! Features: NEW Redesigned Look! NEW Integrated Rubber Buttpad!! 2x...

JMAC Triangle Stock 8" Stock with 1913 Folding Mech Features: 2x Integrated QD Sling Socket 8" Length 0.275" Cheek Rise Drilled and tapped for optional cheek risers 7075 T6 Aluminum Hard-Coat Anodized **Not compatible w/LevTech Manufacturing panels...

JMac 9" Stock with 0.275" Cheek Rise - 1913 Attachment Feautures: NEW Integrated Rubber Buttpad!! 2x Integrated QD Sling Socket 9" Length 0.275" Cheek Rise Drilled and tapped for optional cheek risers Compatible with JMAC & SIG folding...

JMac 9" Triangle Stock with 0.275" Cheek Rise - 1913 Attachment Features: NEW Redesigned Look! NEW Integrated Rubber Buttpad!! 2x Integrated QD Sling Socket 8" Length 0.275" Cheek Rise Drilled and tapped for optional cheek risers Compatible with JMAC...