Lazy Wolf HK Reduced Power Hammer Spring - 11 lb.

Good quality and function, takes seconds to replace the stock hammer spring with this. Two P30 V3?s set up with this and the lighter FPBS dropped from 9# 12 oz to 8# 7 oz, and SA from 4# 9 oz to 3# 6 oz. The difference is very pronounced in DA mode, as the ?stack? at the end of the trigger press is considerably decreased, Both DA and SA action on the two pistols converted were smooth and crisp, and remain so after the conversion. In SA, precision shooting at longer distance is enhanced. There is no effect on reset or trigger travel, and reset remains tactile and crisp. Tested on a wide variety of US and foreign ammo including GECO, S&B, WIN, Federal, CCI, and Fiocchi with zero issues and deep primer strikes. Finally, there was no real change to perceived recoil despite the hammer weight reduction, and no effects noted from slide speed being changed slightly (as in primer smear, etc.). This is a way to improve the out of the box trigger pull for the P30 and does not require any permanent changes to the firearm. For shooters desiring heavier SA weight than I measured, the hammer spring alone will provide some reduction but not as much as with the FPBS added to the conversion.

This combined with the GrayGuns short reset kit makes a nice difference in the P30 trigger. While not match grade, considering this pistol is designed for combat and field use and not target/competition. It definitely smooths out and lightens the stroke a bit.

The 11 lb. hammer spring yields a reasonable DA stroke without any concern for light strikes on common US domestic ammunition. Hard foreign primers have not been evaluated.