HK416 / MR566 Small Parts

HK MR556 & 416 Extractor Axle Pin This factory HK German part holds the extractor in place on the bolt head. This item needs to be changed each time it is removed per HK. Compatible With: HK MR556 HK 416 M27 HK 416 A5  

H&K HK MR556/416 Threaded Pin for E1/E2 Buttstock Release Lever Insert New HK German manufactured E1/E2 stock release and tightening screw that takes the slack and slop out of the stock when in desired position. Compatible With: HK MR556 HK 416

H&K Heckler and Koch's Ejector Retaining Pin for your HK416 and HK MR556 This factory HK German part is the pin that holds the ejector in place on the bolt head. Great to have as a spare part. Compatible With: HK416, MR556

Heckler and Koch HK416, MR556, HK417, MR762 Disconnector Spring - Short This is the shorter spring of the 2 found in the trigger assembly. Compatible With: HK416, MR556 HK417, MR762

Heckler and Koch HK416, MR556, HK417, MR762 Disconnector for Lower New HK German manufactured part. This is the latest generation of HK disconnector for the HK MR and HK HK416 and HK417 family of firearms. Compatible With: HK416, MR556 HK417,...

Heckler and Koch Ambidextrous Magazine Catch for HK416 and HK MR556  Factory HK ambi magazine catch, release. Compatible With: HK416A5, MR556 A4 NOT compatible with earlier variants with single-side controls

H&K HK416, MR556 A4 Front Takedown Pin  The HK416 front takedown pin is a German-made component designed to securely fasten the upper and lower receivers. Precision-machined for a proper fit, it ensures reliable function and serves as an ideal...

H&K HK MR556/416 Forward Assist Plunger Pin  

H&K MR556, HK416, HK417, MR762 Rear Takedown Pin Factory A4 rear takedown pin.  Will work for A1 and A4 applications.   Compatible With: HK MR556 A1 and A4 HK416 HK MR762 A1 and A4 HK417 AR-14, M4, M16    

HKP HK MR556/416 Extractor Spring Buffer This buffer fits inside the extractor spring in the extractor pocked of the bolt. This item is a high wear item and a spare would be highly advised. Compatible With: HK MR556 & HK416 Firearms

H&K MR556 A4 Hammer Spring Genuine H&K hammer spring for the MR556 A4. Compatible With: HK MR556 A4

HK Heckler and Koch Clamping Sleeve or Roll Pin for Pawl on Charging Handles This is the longer one that is used on the outside of the charging handle. There are one of these pins used per charging handle.