Extended Magazine Release For HK Pistols
The most popular upgrade available for your HK pistol. By adding the HK45C extended mag release will provide more than double the contact, surface area to aid in faster, more reliable mag releases. The larger mag release makes it possible to release the magazine without changing the position of your grip. Easily installed & The cheapest improvement you can made to your HK pistol. Every HK owner should upgrade. Read the many raving reviews and you will see what you have been missing. Now finally available & hard to find!
Fits All Of The Following HK Pistols In All Calibers 45, 40, 357 & 9m:
- All HK USP Tactical, Elite & Expert Pistols
- All HK USP Full Size Pistols
- All HK USP Compact Pistols
- All HK P2000 Pistols (All Models)
- All HK P2000SK Pistols (All Models)
HK45C this is the factory upgraded mag release for this model
Will not fit the HK45 full size, P30, P30L, VP9 or Mark 23 Pistols.
This is a simple straight forward parts swap and can be done in a few minutes. The end result is a much easier mag release and better comfort for mag changes. Highly desirable and one of the cheapest upgrades you can do to your HK pistol.
Simple install: Use a 2.8mm punch to drive out out the roll pin. HK suggests replacing the roll pin (clamping sleeve) EVERY time you remove any roll pin. Pull down on the mag release gently, remove the spring (replace spring if needed) from the old mag release. Replace the mag release with the new HK 45C mag release. Re-install by compressing the spring in place, and pushing the new roll pin in place. We have both the 3mm roll pin and the magazine release spring in stock below so grab a few spares. Swap out all of your HK mag releases with this upgraded version. It is the best upgrade for the money on your HK pistol.
Please note: In some cases, the extended magazine release will not engage the jet funnel magazines properly. It is best to use them with standard magazines only on the USP full size pistols.
Please Take Note: That although this mag release will fit all of the HK models listed above this is not an approved modification by HK. This magazine release is designed specifically for the HK45C as the standard OEM magazine release and not a factory upgrade for the HK pistols mentioned above. This new style magazine release has a steel insert. That makes contact with the magazine catch notch. And if installed on a USP pistol using polymer magazines. The steel contact point can eventually dig into the polymer magazine and cause the magazine fitment to become loose and possibly for mags to fall out. HK does not approve this modification especially for L.E. use.
- Condition: new
- Origin: German
- Section: Pistol Frame Parts
- Brand: Heckler & Koch
- Type: Magazine Release
- Sub-Type: Lever