Firing Pin, Striker VP9, VP9SK & VP40 – Titanium

(6 customer reviews)

$59.95

HK VP9, VP40, VP9SK – Firing Pin/Striker – Titanium

The lightest firing pin for your VP9, VP40 pistol.

Upgrade your HK VP series pistol to a Ti firing pin. This will allow for a faster & reduced lock time for faster shots and improved accuracy. By adding the titanium firing pin to your VP pistol you will notice a lighter trigger pull overall. A true drop in part made of the strongest, lightest firing pin material available. Made 100% in the USA from solid billeted Titanium which weighs nearly half of the factory firing pin. Coated in a robust DLC (diamond like coating) PVD process for extra hardness, wear resistance and durability.

Fits all HK VP Series Models:

  • HK VP9, VP9 Tactical, VP9L, VP9 OR
  • HK VP40, VP40 Tactical
  • HK VP9SK

Please note: Because of the inherent wear characteristics of Titanium and the wear properties of hardened steel of the lower grip steel sear vs. the Titanium  firing pin, the steel will eventually wear a groove in the titanium firing pin requiring a replacement. This item is sold as a wear & consumable part that will need to be replaced with use. As such there are no returns available for this item. They are sold as is.

  • Condition: New
  • Origin: USA
  • Section: Pistol Slide Parts
  • Brand: USA
  • Type: Firing Pin
  • Sub-Type: Striker

In stock

SKU: HKP-17643

Share your thoughts!

4 out of 5 stars

6 reviews

Let us know what you think...

What others are saying

  1. 2 out of 2 people found this helpful
    reidw

    Not durable or reliable

    reidw

    Have 3 of these. One each for a VP9 and VP40, and another for a VP9sk (different part #). I shoot the V9 and VP40 ~200 rnds each on a weekly basis. A few weeks ago I started getting dead trigger on both. Bump and rack sometimes fixed, but not always. Noticed the firing pin wasnt back when the trigger was dead, and if I did a press check the firing pin would reset and trigger worked. Deep clean of both didnt make a difference, but then I noticed the severe wear on the firing pin where the catch engages (see photo. titanium pin on left, stock steel pin on right). Both titanium pins in the VP9 and VP40 had the same wear. Replaced both with the original stock firing pins, and both work fine now, no dead trigger. I’ll still reorder and use this titanium firing pin in my competition vp9 and training vp40 because I like the feel of it, and I’ll concede that I’ll need to have replacements on hand when (not if) they wear out. BUT, I am swapping back to the stock firing pin on my ‘work’ VP9sk because I would want the trigger to work all the time and every time on that one.
    If you have this titanium firing pin, check it. If it’s starting to look anything like the left pin in the photo, replace it before you get an underwear staining dead trigger experience.

    (2) (0)

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  2. Jesse Cunningham

    100% perfect

    Jesse Cunningham

    Great product, highly recommend it!

    (0) (0)

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

    • Jesse Cunningham

      It does reduce trigger pull. Combine with the enhanced firing pin block spring and lazy wolf F3 trigger makes for a great combination.

      (0) (0)

      Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  3. René Marro

    Excellence

    René Marro (verified owner)

    High quality, perfect fit and easy to install.

    (0) (0)

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  4. JAMES L Zayas Vega

    Upgrade

    JAMES L Zayas Vega (verified owner)

    It is lighter than the factory

    (0) (0)

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  5. ams30gts

    Perfect

    ams30gts (verified owner)

    I waited MONTHS for this to come back in stock and it was worth the wait. The stock striker had rough manufacturing on the surface where it meets the seer. Tried HK customer service and they wanted me to send in the gun. Got this and it 100% fixed the problem as well as lightening up the trigger pull. I also have the LW trigger and this combo is awesome. Highly recommended.

    (0) (0)

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  6. Herb

    Should Have Read the Disclaimer Before Ordering

    Herb (verified owner)

    I bought the titanium striker for my VP9SK to reduce the trigger pull. I saw the review/photo that complained about the striker wearing down in one spot and then not firing. I thought it might be a one-off and did not notice the disclaimer at the end of the item description that the striker would eventually wear a groove in it. Had I known would I have bought it? Not sure, I guess it depends on how many rounds I can fire before the wear becomes evident. One thing I will point out – the titanium striker is definitely lighter than the factory striker. The factory striker weighs 7.82 grams and the titanium one weighs 4.36 grams, a full 44.2% less. Now I hope I get my money’s worth out of it. I will also point out that I have a titanium strikers in one of my Glock’s and have never encountered this “wear” issue.

    (0) (0)

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

×

Login

Register

A password will be sent to your email address.

Continue as a Guest

Don't have an account? Sign Up