HK417 / MR7627 Barrels

Heckler and Koch Complete Piston Rod Assembly for your HK416, HK MR556, HK417, HK MR762 A great replacement or spare to keep on hand. Compatible With: HK 416, HK MR556 HK 417, HK MR762 Please Note: Does not fit barrels less than 10 inches.

H&K HK MR762/417 Gas Block Pin This is the retaining pin for an HK MR762 gas block. A must have as HK says you have to use new pins once they are removed. Compatible With: HK MR762 HK 417

HK MR762 Barrel Nut Or Socket Barrel - German HK A must have for any removal or work done to barrel as the barrel nut may need to be replaced./417 Compatible With: HK MR762/417

H&K MR762 A4 1.1mm Gas Vent Screw German 1.1mm gas vent screw for MR762 A4. Provides less venting than the factory-installed 1.3mm screw. Compatible With: MR762 A4

H&K MR762 A4 1.2mm Gas Vent Screw German 1.2mm gas vent screw for MR762 A4. Provides less venting than the factory-installed 1.3mm screw. Compatible With: MR762 A4

H&K MR762/417/G28 Gas Block New German HK manufacture for the HK MR762 & HK417, G28 firearm. This unit comes without the sling loops installed. Compatible With: HK MR762 HK 417 HK G28

H&K MR762 A4 1.0mm Gas Vent Screw German 1.0mm gas vent screw for MR762 A4. Provides less venting than the factory-installed 1.3mm screw. Compatible With: MR762 A4

HK417, MR762 Upper Receiver Rod - Tool Protect your valuable HK receiver when installing and removing barrel nuts and muzzle devices with this invaluable tool.  Especially critical for removing seized components as this tool protects the receiver...

H&K MR762 A4 2.4mm Gas Vent Screw German 2.4mm gas vent screw for MR762 A4. Provides more venting than the factory-installed 1.3mm screw. Compatible With: MR762 A4

H&K MR762 A4 2.1mm Gas Vent Screw German 2.1mm gas vent screw for MR762 A4. Provides more venting than the factory-installed 1.3mm screw. Compatible With: MR762 A4

H&K MR762 A4 1.3mm Gas Vent Screw The 1.3mm gas vent screw is the standard size installed at the factory on the MR762 A4. Compatible With: MR762 A4

H&K MR762 A4 1.5mm Gas Vent Screw German 1.5mm gas vent screw for MR762 A4. Provides more venting than the factory-installed 1.3mm screw. Compatible With: MR762 A4